News

In this article, we share three reliable high quality stainless steel plates manufacturers. If you are looking for such stainless steel plates products, you can contact Mirach Metallurgy Co.,Limited for a quotation.

Mirach Metallurgy Co.,Limited is a professional distributor specializing in steel and aluminium business for more than a decade, including stainless steel bar and sheet, tinplate, cold rolled, and wrought aluminium coil alloy products from 1000 to 8000 series.

Lung An Stainless Steel Ind. Co., Ltd. has established since 1998. We are one of the main suppliers of stainless steel in Taiwan.

Shandong Lu Steel Co., Ltd. is located in the head of Chinese Five Mountains, at the foot of Tai Mountain. We are adjacent to the hometown of Confucius, the front head of city of Springs, with Jinan on the back, Qingdao near the Yellow Sea

In this article, we discuss how to set up Aluminum Coil Trim in a easy way. If you have brought Aluminum Coil Trim products, you can both pay for professional set up service or do as the following four steps.

1.Take length measurements of the trim features, such as the top of the window and soffit lengths, to determine the required size for the sheet metal brake.

2.Cut the aluminum trim coil to the required length using aviation snips or a utility knife depending on the metal thickness.

3.Measure and pencil mark the aluminum coil trim length where you need to shape a bend to cover the base substrate, such as over a J-channel fixing or over a roof edge.

4.Fasten the aluminum trim with coated aluminum nails that match the trim color to blend in the fastening points.

In this article, we are going to share four high quality and professional Aluminum Coil Stock Suppliers. If you are wholesale of Aluminum Coil related products buyer, you can contact them for detail.

Mirach Metallurgy Co.,Limited is a professional distributor specializing in steel and aluminium business for more than a decade, including stainless steel bar and sheet, tinplate, cold rolled, and wrought aluminium coil alloy products from 1000 to 8000 series.

AFFORDABLE ALUMINUM was established in 1981 and has been owned and operated in Pinellas County ever since. Our installers are full time Employees that have been employed with us for many years and are well trained professionals. Our office staff has extensive training in shipping parts, materials and kits all over the world.

Henan Xindatong Aluminum Industry Co., Ltd. specializes in manufacturing aluminum sheets, aluminum coils, aluminum foils and aluminum strips. Our company is located in the Science & Technology Industrial Park.

Jiangsu PRAC Aluminum Coating Co., Ltd. is a member of Jiangsu JINHUI Group and is a high-tech enterprise which manufactures pre-painted aluminum coil.

In this article, experts from http://www.mirachmetallurgy.com/ share both wholesale and retail price of Aluminum Coil products. If you are looking for Aluminum Coil related products, you can see the following info below.

3003 aluminium coil prices                                            Min. Order: 5 Tons      FOB Price: US $1800-3000 / Ton

good quality,reasonable price aluminium coil        Min. Order: 1 Ton     FOB Price: US $2000-4000 / Metric Ton

Rollex X50 Acrylic Aluminum Trim Coil                   price:   $91 to $130

Rollex X50 Acrylic Aluminum Trim Coil                   price:  $75

Rollex 18X50 Acrylic Aluminum Trim Coil              price:  $98

In this article, experts from Mirach Metallurgy Co.,Limited collects two reliable Aluminum Coil Anodizing Corporations. If you are seeking for Aluminum Coil Anodize related distributors, you can contact them for detail.

Mirach Metallurgy Co.,Limited is a professional distributor specializing in steel and aluminium business for more than a decade, including stainless steel bar and sheet, tinplate, cold rolled, and wrought aluminium coil alloy products from 1000 to 8000 series.

Welcome to the World of Amazing, Ageless, Anodized Aluminum! Since 1961, ACA has been a global technology leader and solutions provider in Continuous Aluminum Coil Anodizing and in service center processing and distribution. Aluminum Coil Anodizing Corp. is located in Streamwood, Illinois. View detailed contact information and local driving directions for Aluminum Coil Anodizing Corp..

In this article, we are going to share 3 famous and reliable Aluminum Coil Stock Distributor in the world. The brief introduction of them are as follow:

Mirach Metallurgy Co.,Limited is a professional distributor specializing in steel and aluminium business for more than a decade, including stainless steel bar and sheet, tinplate, cold rolled, and wrought aluminium coil alloy products from 1000 to 8000 series.(http://www.mirachmetallurgy.com/about-us/)

Michael S. Killam, President of MSK Enterprises, has been in the steel industry since 1976. In 1990, Michael founded MSK, which has grown to include a knowledgeable and helpful sales and support staff. (http://www.mskent.com/company.htm)

Prometco is an innovative distributor of Stainless steel and aluminum slit coil products. We provide industry with quality metal at competitive prices. We stock, process and ship throughout US, Mexico and Canada.(http://www.prometco.net/index.html)

In this news, experts from Mirach Metallurgy Co.,Limited share several  high quality Aluminum Coil Distributors: Mirach Metallurgy Co.,Limited, Amerimet and Rolling mill. If you are seeking for Aluminum Coil related products Distributors, contact them directly.

Mirach Metallurgy Co.,Limited

Mirach Metallurgy Co.,Limited is a professional distributor specializing in steel and aluminium business for more than a decade, including stainless steel bar and sheet, tinplate, cold rolled, and wrought aluminium coil alloy products from 1000 to 8000 series.

Amerimet

Welcome to Amerimet, a full-service metals processor, distributor and exporter of aluminum and steel coil and flat sheet. We supply our extensive offering of metal products to a vast network of manufacturers and fabricators throughout the United States, the Caribbean and Latin America.

Rolling mill

ISO 9001:2008 certified manufacturer of custom rolled aluminum coil. Rolling mill specializing in annealing & slitting of aluminum coil to customer specifications. Also, offers a wide range of alloys including brazing sheet, all tempers & special finishes. Ultra-close tolerances in any gauge .

In this article, Mirach Metallurgy Co.,Limited shares the detail info of stainless steel fittings. You can get stainless steel fittings and its related products specification. You can contact professional tinplate manufacturer Mirach Metallurgy Co.,Limited.

Stainless Steel Spectacle Blind Flanges
Type
Weld Neck, Socket Weld, Slip On, Screwed, Long Weld Neck flanges, lapped Joint, Spectacle Blind.
Size
1/2” NB to 60” NB
LBS
150#, 300#, 600#, 900#, 1500# & 2500#
Standard
ASA 150 & ASA 300- D, E, F, H, DIN, ND- 6, 10, 16, 25, 40 etc.
Grade
ASTM A 240 / 182 F – 304H, 316H, 316Ti, 309, 310, 317L, 321, 347, 904L

In the article, Mirach Metallurgy Co.,Limited introduces 316 stainless steel and its detail information.In metallurgy, stainless steel, also known as inox steel or inox from French “inoxydable”, is defined as a steel alloy with a minimum of 10.5% to 11% chromium content by mass. The detail info of spec you can find below:

Composition

Table 1. Composition ranges for 316 grade of stainless steels.

Mechanical Properties

Table 2. Mechanical properties of 316 grade stainless steels.

Note: 316H also has a requirement for a grain size of ASTM no. 7 or coarser.

Physical Properties

Table 3. Typical physical properties for 316 grade stainless steels.

Grade Specification Comparison

Table 4. Grade specifications for 316 grade stainless steels.

In the news, Mirach Metallurgy Co.,Limited share the info of The Detail Stainless Steel Prices from famous tinplate related products manufacturers.  The detail pricing info of Stainless Steel is as follow:

Austenitic, or 300 series. A typical composition of 18% chromium and 10% nickel, commonly known as 18/10 stainless, is often used in flatware. 18/0 and 18/8 are also available. Low-carbon versions, for example 316L or 304L, are used to avoid corrosion problems caused by welding.

Price Pfister Replacement Faucet Sprayhead Stainless Steel                                     price:  $49

Price Pfister GT34-1PS0 Portland Single Handle Kitchen Faucet Stainless Steel                            price: $109 to $116

Price Pfister GT72-M1SS Marielle Single Handle Bar/Prep Faucet Stainless Steel          price:   $155 to $184

Price Pfister Stainless Steel 3 hole Kitchen Faucet                                 price:    $57

In this article, we discuss how to cut thick-gauge stainless steel.  In fact, the whole produce process of thick-gauge stainless steel and related products should be much more complex. If you are seeking Stainless Steel products, you can contact Mirach Metallurgy Co.,Limited for more info.

1. Cut steel thicker than 8 gauge with an angle grinder with an abrasiveness cutoff wheel that is designed for making rough cuts on stainless steel. Be sure to use a face shield, safety glasses, leather gloves and earplugs to protect yourself from flying debris, sparks and loud noise produced by the angle grinder.

2. Clamp your stainless steel plate down to a sawhorse or work bench in a well-ventilated area. Cutting with an angle grinder will produce a lot of sparks and smoke and should be done far away from any flammable substances.

3. Mark with a permanent marker or scribe where you would like to make your cut.

4. Fit your abrasiveness cutoff wheel onto your angle grinder and adjust the guard so that the blade is exposed. Release the safety and engage the motor before contacting the surface of the metal.

5. Cut through the metal plate slowly and try to aim any sparks away from your body and face. The angle grinder cannot make curved cuts, so you will have to approximate curves with rough, angled cuts and then grind them into curves later.

6. Let the cut cool for five to 10 minutes before touching it. If you have rough sections that must be shaped into curves, fit a grinding wheel only your angle grinder and stand down sharp edges, using the same precautions you would for cutting, until the shape is fully formed. Finally, sand any rough edges or burs when your work has cooled.

In this article, we discuss how to cut Medium-Gauge Steel. The whole technology is just 5 steps. The detail of  Medium-Gauge Steel products produce process you can find below.

1. Cut steel between 16 gauge and 8 gauge with an electric jigsaw with a metal cutting blade or with a hacksaw.

2. Clamp your steel to a work bench or sawhorse. For thinner gauge metal you may want to use a piece of scrap wood as backing so that the stainless steel sheet does not bend during cutting.

3. Mark a line along which you wish to make your cut with a permanent marker or scribe.

4. Put on a pair of safety glasses, leather gloves and earplugs. Fit your metal cutting blade into your hacksaw or jigsaw. Line the blade up with the edge of the steel sheet and activate the electric saw blade. The blade may heat up quickly, which will cause it to dull, so work slowly and take frequent breaks from cutting. Keep hands and fingers out of the path of the saw blade at all times and watch for flying debris. If the saw blade gets stuck at any point, immediately disengage the power and realign the blade to prevent damage to the saw.

5. Sand the rough edges and burs with sandpaper after you have allowed the piece to cool.

In this article, experts from professional hot line clamp manufacturer share the steps for cutting thin-gauge steel. There are four important steps you should do to cut thin-gauge steel and its products.

1.Cut thin stainless steel metal, between 25 and 15 gauge, with a pair of compound-action snips or shears, also called aviator's snips or tin snips.

2. Mark on your stainless steel sheet with a permanent marker or metal scribe where you want to make the cut.

3. Place the edge of the stainless steel all the way inside the jaws of the snips and cut along the line that you marked.

4. Use sandpaper to soften rough edges and remove dangerous burs once the cut is complete.

In this news, Mirach experts collects 4 high quality stainless steel coil suppliers in the world. If you are looking for stainless steel coil and related products, you can contact them for detail.

Mirach Metallurgy Co.,Limited

Mirach Metallurgy Co.,Limited is a professional distributor specializing in steel and aluminium business for more than a decade, including stainless steel bar and sheet, tinplate, cold rolled, and wrought aluminium coil alloy products from 1000 to 8000 series.

Skorr Steel

At Skorr Steel, we ONLY stock quality stainless steel PLATE. We specialize in the unusual grades: 347, 420, 440C, 17-4PH & 15-5PH from 3/16" to 4" thick. We offer waterjet cutting, plasma cutting, shearing and abrasive saw cutting. We are ISO 9001:2000 certified. Ask about expedited service. Thanks to our dedicated and knowledgeable staff, turnover has never been an issue at Skorr Steel.

Penn Stainless

Rely on Penn Stainless Products for the highest level of stainless steel and in-house processing possible with the best customer service in the industry. We serve you from locations across the country with a wide variety of stainless steel products. As a full service center, Penn Stainless practices on-going system improvements to ensure that we supply our customers with quality stainless steel.

Metalmen

Metalmen is your go-to source for nationwide & global distribution of aluminum, stainless steel, titanium, nickel & its alloys, Monel & high temperature alloys in such forms as foil, strip, blanks, sheet, coil, plate, wire, rod, bar, tube & pipe. Over 30 years experience means expert market advice & complete metalworking processes to supply each customer's specialty metal needs. Large inventory of on-demand metals with fast delivery. Fully Certified – Quality Control Oriented, AMS, ASTM, MIL, QQ. We specialize in pure metal supply & welcome non-standards & small quantities!

In this news, experts from stainless steel wire related products manufacturer Mirach Metallurgy share 3 industrial companies here. The four high quality stainless steel wire suppliers are your choice if you are planning to purchase such products.

Mirach Metallurgy

Differ from traditional traders; Mirach Metallurgy is a high-technology and professional metallurgy distributor. We are specializing in providing high added value including  aluminium coil ,  tinplate and stainless steel bar  with technology and innovation.

Malin Company

Since 1884, Malin Company has emerged a leading supplier of stainless steel wire, copper wire and safety lockwire to industry. We are a full-service supplier and can accomodate virtually any packaging requests.

Brookfield Wire

Brookfield Wire is a leading supplier of cold drawn stainless steel, nickel and nickel alloy wire. Brookfield Wire’s stainless steel and nickel alloy products are manufactured to the highest industry standards in a broad range of chemistries, sizes, tempers, and finishes.