Warning: ob_start(): output handler 'ob_gzhandler' conflicts with 'zlib output compression' in /home/mirachm/public_html/wp-content/plugins/wordpress-gzip-compression/ezgz.php on line 39
4 Steps to Set Up Aluminum Coil Trim

4 Steps to Set Up Aluminum Coil Trim

In this article, we discuss how to set up Aluminum Coil Trim in a easy way. If you have brought Aluminum Coil Trim products, you can both pay for professional set up service or do as the following four steps.

1.Take length measurements of the trim features, such as the top of the window and soffit lengths, to determine the required size for the sheet metal brake.

2.Cut the aluminum trim coil to the required length using aviation snips or a utility knife depending on the metal thickness.

3.Measure and pencil mark the aluminum coil trim length where you need to shape a bend to cover the base substrate, such as over a J-channel fixing or over a roof edge.

4.Fasten the aluminum trim with coated aluminum nails that match the trim color to blend in the fastening points.